• Unique two phase expression-pump more milk in less time
• 1 year warranty on the motor unit
• LED light indication in ON position, Efficient and comfortable: a powerful little motor and a fitted breast shield
• Allows automatic or individual operation
• Practical Parenting and Pregnancy Awards 2009/10

• Mimicking a babys natural nursing rhythm more precisely than any other system.
  
• Initial fast pumping rhythm at 120 cycles per minute called Stimulation Phase followed by a slower pumping rhythm at 45-72 cycles per minute called Expression Phase.

• Automatic or Individual option, both comprising stimulation and expression mode.
• Automatic-Fully automatic switching from stimulation to expression mode after two minutes.
• Individual-When the milk let-down occurs beforethe 2-minute stimulation has elapsed and the mother wishes to reduce the stimulation time, she has the choice to continue with expression immediately by pressing the Let-down button.

• For mothers’ convenience one knob combines vacuumlevel and the number of cycles per minute in the expression phase.
• This means, the mother adjusts the vacuum to her individual comfort level by means of the vacuum increase (+) respectively decrease (-) button and the Swing will automatically apply the optimum frequency for that specific vacuum level.
• View Larger

LED

1. lights up-on.
2. does not light up-off.

• Small and ultra light.
• Storing bag included.
• Fits into the CityStyle Breastpump Bag.

• Offers the mother more freedom of movement while pumping.

• The SoftFit Breastshield stimulates the breast gently and effectively.
• Powered with mains adapter or batteries.
• Single pumping only.

• Ideal for occasional use.
• Several time per week, e.g. twice a day.
• Single user product-personal care item.

• Suction strength Full range vacuum adjustable.
• Stimulation Phase-min. approx-50 mmHg.
• max. approx-120 mmHg Expression Phase-min. approx-50 mmHg.
• max. approx-250 mmHg.
• Suction cycles Stimulation Phase-fixed 120 cycles/minute Expression Phase-varying cycles 45-72 per minute.
• Power supply-Mains Adapter-Input: 230/240 V, 50 Hz 120 V, 60 Hz (depends on plug).
• Output: 4,8 V, 800mA.
• Batteries 4 x 1.5 V alkaline AA batteries.
• Dimensions 121 x 121 x 56 mm (pump).
• Weight With batteries 330 g Without batteries 230 g.
• Warranty 1 year for the motor unit from the date of purchase, excluding pump kit.
• Diaphragm Pump System.

• Unplug breastpump prior to cleaning.
• At home Daily or when spills occur.
• In between each mother and/or on a regular basis, e.g. daily.
• Use a damp (not wet) cloth to wipe over the breastpump. Optionally, soapy water or a non-abrasive detergent may be used.
• Do not spray or pour liquid directly onto the pump.
• Do not immerse the Symphony pump unit in water or shower the diaphragm area.

• Hands should be thoroughly washed with soap and water before touching the breast and pump parts.
• The breast and surrounding area needs cleaning with a damp cloth. Soap or alcohol should not be used which can dry the skin and cause cracked nipples.
• Touching the inside of bottles and lids should be avoided.

• Minimum vacuum is always automatically set at 50 mmHg.
• If there is low or no suction, make sure.
• the breastshield forms a complete seal around the breast.
• all connections of the kit and breast pump are secure.
• the white valve membrane is lying flat against the yellow valve head. Check that the valve head is clean and not damaged.
• the ends of the tubing are fit securely into the backs of the breastshield and into the port on the Breast pump.
• the tubing is inserted into the tubing port and not into power jack.
• Take care not to kink tubing. If milk is seen backing up into tubing, check that tubing is not kinked or pinched.
• If milk accidentally gets into the pump, turn off the pump and unplug from power source. Use a damp (not wet) cloth to wipe the Breast pump and proceed as follows:
• Open the battery cover, remove the expanded-plastic liner.
• Wash the expanded-plastic liner with clear, lukewarm water and squeeze out well. Allow to dry thoroughly.
• Pour about 1 dl of warm soapy water into a container.
• Connect the tubing and the power cable onto the pump.
• Hold the end of the tubing that is not connected to the pump in the container with the soapy water.
• Hold the device over a dry flushing bath and switch on. The water is pumped through the tubing into the device and flows out again through the opening beneath the battery cover. Allow it to pump until all the water has been flushed through.
• Repeat this procedure again with 1 dl of clear, warm water.
• The leave the device switched on for a further 3 minutes, so that the pump can dry out.
• As soon as the expanded-plastic liner is dry, put it in place again and close the battery cover.
• If necessarily, clean the pump kit according to cleaning instructions “Prior to first use and once daily”. The device is ready for use again.
• View Larger
• Consisting of
• 1 Motor unit.
• 1 SoftFit Breastshield (24 mm).
• 1 2-Component Connector.
• 1 PVC tubing.
• 1 Valve head.
• 1 Valve membrane (one spare included).
• 1 breastmilk bottle with imprint (150 ml).
• 1 Lid.
• 1 Disc.
• 1 Cap.
• 1 Bottle stand.
• 1 Mains adapter.
• 1 Storing bag.
• 1 Sling.